DigiPoxy MMA fast cure 5 minutes Black

Digipoxy Fast cure 2K epoxy MM 5-10 minutes Extreme fast 5-10 minutes working cure full strength after just 30 minutes. Metals , Carbon , Plastic..

FEATURES:

• High viscosity, non-sag application
• Fast cure system
• Excellent tensile and impact strength
• Primerless metal bonding for most metals
• Excellent environmental and chemical resistance
• Minimal surface preparation
• Choice of working times
• MMA based 1:1 mix ratio

• Fixture time is the time to achieve 70% of ultimate strength in lap shear

TYPICAL PHYSICAL PROPERTIES at 24°C (75°F):

Tensile Strength MPa (psi) 35 – 40 (5,076 – 5,802)

Lap Shear Strength MPa (psi) 18 – 25 (2,611 – 3,626)

Maximum Tensile Elongation (%) 5 – 10

Service Temperatures °C (°F) -40 to 100 (-40 to 212 )

Tensile Modulus MPa (psi) 1,100 – 1,240 (160,000 – 180,000)

RECOMMENDED SUBSTRATES:

Composites: epoxy laminates, FRP (polyester/vinyl ester), gelcoats

Metals: aluminium, carbon steel, stainless steel

Thermoplastics: ABS, acrylics, vinyl, PVC, polycarbonates